Kaleidoscope Parts & Accessories

/Kaleidoscope Parts & Accessories
  • Glass Circle 5" glass wheel 4mm
  • Acrylic Tube This is a clear acrylic tube that is compatible with our Brass Eyepiece (#714). It is 1-1/8 inches diameter by 7-3/4 inches long. It can be incorporated into your own kaleidoscope designs using holographic paper or almost any other filling or coating!
  • Acrylic Tube This is a clear acrylic tube that is compatible with our Brass Wand Adapter Head (#510), Brass Eyepiece (#715), or Finishing Ring (#716). It can be incorporated into your own kaleidoscope designs using holographic paper or almost any other filling or coating!
  • Kaleidoscope Parts Each hardware set comes in a pack containing wooden wheels, eyelets, axle, ball, and flat brass piece
  • Aeroscope Strut Set Comes bulk packed. Each set ordered contains 8 struts total (4 of 1/16" strut and 4 of 3/64" strut)
  • Aeroscope Strut Brass rod for Aeroscope -- 1/16" diameter x 8" long
  • Aeroscope Strut Brass rod for Aeroscope -- 3/64" diameter x 8" long
  • Assorted Kaleido-Gems Assorted Kaleido-Gems contain a 1 pound mix of colorful glass balls, silver-lined bugle beads, polished semi-precious stones, etc. They contain only glass and stone, no plastic! This economical mixture creates a varied, interesting image in any kaleidoscope. Assorted Kaleido-Gems can be used in Clarity’s Image Disk, or in any kaleidoscope object chamber.
  • Axle Pack This is the most popular packet necessary for building any kaleidoscope with a spinning wheel on the end. Each Pack contains: 1-3 inch threaded brass axle, 1 threaded brass ball, 4 long eyelets (#710), 2 short eyelets (#712).
  • Axle Threaded This solid brass Axle is designed for use with the Mini-Scope, Spiral Scope, Aeroscope, Image Disc, and almost any other Kaleidoscope that has a wheel on the end! It is 3 inches long with a 1/8" diameter. It is threaded to fit the #707 Brass Ball.
  • Ball-Threaded for Axle This solid brass ball measures 3/8" diameter and is threaded to fit the end of our brass axles (#704 & #705) to hold your kaleidoscope wheels in place at the end of the axle.
  • Brass Rope Tube This brightly polished brass rope tube is used in the Little Marblescope and Mini Oil-Wans Scope and measures 2-1/8 inch length by 5/8 inch diameter.
  • Brass Rope Tube This is a brightly polished solid brass rope tube measuring 8 inches long by 1-1/8 inches diameter
  • Brass Wire This brass wire is used in our Little Marblescope in order to hold the marble in place at the end of the Finishing Ring. It measures 3/64" diameter and is 4 inches long.
  • Carbide Strip Cutter Wheel Toyo brand Carbide Wheel perfect for scoring strips of mirror. Tough and durable Carbide wheel lasts and lasts. Assemble on the end of a strip cutter and use with Silicon lubricant spray -- you'll be pleased with the results!
  • Brass Rope Tube This is a brightly polished, chrome-plated solid brass rope tube used in our Little Marblescope Kit. It measures 2-3/8 inches long by 5/8 inch diameter.
  • Classic Kaleidogems Classic Kaleido-Gems contain one pound of fine quality faceted glass jewels in an assortment of sizes, colors, and shapes. These gems are all costume jewelry quality and create a sparkling image inside your kaleidoscopes. They can be used in Clarity’s Image Disk, or in any kaleidoscope object chamber.
  • Clock Dial Face Clock Face with classic European styling. 5 inch metal face with spun brass finish, decorative numeral ring, and etched center design. A set of black hour, minute, and second hands included.
  • Clock Dial Face Clock Face with classic European styling. 7 inch metal face with spun brass finish, decorative numeral ring, and etched center design. A set of black hour, minute, and second hands included.
  • Clock Motor w/hands Includes a precision quartz clock movement with all assembly hardware, plus brass hour, minute, and second hands.
  • COE 90 Wheel Pack These wheels come in packs of two 3" wheels with fusing instructions. They also have the center holes already drilled and two sets of brass bushings. They are made of COE 90 glass.
  • Glass Circle COE 90 glass wheel pack
  • Electrical Cord with Switch Socket

    OLYMPUS DIGITAL CAMERA

    This electrical cord with switch and light socket is perfect for use with our Fan Lamp Bases.
  • Eyelet for brass axle This brass eyelet slips over our brass axle (#705) to accommodate a spinning object on the axle. This eyelet is to be used in conjunction with eyelet #712.
  • Brass Eyelet This brass eyelet slips over our eyelet #710 to accommodate a spinning object on the axle (#705).
  • Brass Eyepeice This is a solid brass, polished kaleidoscope eyepiece with a 3/8” diameter viewing hole. This eyepiece fits our Spiral Brass Tube (#904).
  • Brass Eyepeice This is a solid brass, polished kaleidoscope eyepiece with a 5 mm diameter viewing hole. This eyepiece fits our Little Spiral Brass & Chrome Tubes (#901 & #902).
  • Felt Pads Adhesive Felt Pads aid in centering kaleidoscope mirror into a tube, cushion the feet for a kaleidoscope to stand on, or many other uses. 1/2 inch diameter, sold by the roll: 1000 pads per roll.
  • Felt Pads Adhesive Felt Pads aid in centering kaleidoscope mirror into a tube, cushion the feet for a kaleidoscope to stand on, or many other uses. 3/8 inch diameter, sold by the roll: 1000 pads per roll.
  • Finishing Ring Slotted This solid Brass Finishing Ring is polished and lacquered for use on the end of our little brass or chrome spiral tubes (#901 & #902). This ring is slotted for use with the 4" wire (#722) in our Little Marblescope. An unslotted Finishing Ring is also available (Part #717).
  • Finishing Ring Unslotted This solid Brass Finishing Ring is polished and lacquered for use on the end of our little brass or chrome spiral tubes (#901 & #902). A slotted Finishing Ring is also available (Part #717).
  • Glass Circle Glass circle to be used for eye-cover or dust-cover 9/16 inch diameter
  • Glass Circle This is a glass 1" diameter circle used as a dust-cover inside a kaleidoscope tube.
  • Glass Circle 30 mm Glass wheel.
  • Glass Circle 60 mm Glass wheel
  • Image Disk Set The Image Disk creates a rotating image chamber for your kaleidoscope by joining two clear glass domes! The Image Disk copper-foils together in minutes and can be filled with scraps of glass, beads, jewels, or just about anything. It mounts easily on the axle of Clarity’s Mini-Scope, Spiral-Scope, and Aeroscope, or can be mounted on your own kaleidoscope designs. The Image Disk can be filled with Clarity’s Classic or Assorted Kaleido-Gems (#605 or #606). The package includes two 2½” diameter glass domes with center holes and mounting eyelets.
  • Back by popular demand!! The Image Wheel creates a rotating image chamber for your kaleidoscope by joining two glass wheels on either side of a grooved brass wheel. This design allows you to make a finished image generator in a matter of minutes to create beautiful images! Gems are not included in this ensemble but the axel pack is. The Image Wheel glues together in minutes (epoxy works well) or can be foiled and soldered together and can be filled with scraps of glass, beads, jewels, or just about anything. The package includes one 2.5" Brass or Chrome ring (9/16" wide) 2 glass wheels that fit in the grooved inner ring, and a complete axel assembly. It mounts easily on the axle of Clarity’s Mini-Scope, Spiral-Scope, and Aeroscope, or can be mounted on your own kaleidoscope designs. The Image Wheel can be filled with Clarity’s Classic or Assorted Kaleido-Gems.
  • A packet of Kaleido-Flowers contains a colorful assortment of dried, pressed wildflowers in an array of colors, shapes and sizes. These flowers can be pressed between two pieces of glass and incorporated into any stained glass design. They are also recommended for use with Clarity’s Lamination Wheels (#612) to mount on the axle of a kaleidoscope.
  • Kaleidoscope Parts All kits sold direct to Kaleidoscope Artists are shipped in the form of bulk parts only. If you wish to receive printed instructions for any kit, please order separately here.
  • Lamination Wheel Set Lamination Wheels are four 3” diameter glass circles with center holes and two sets of brass eyelets. Between each set of glass wheels, you can laminate Clarity’s Kaleido-Flowers, or any other flat items like stamps, stickers, paper shapes, etc. You can make two rotating glass wheels to mount on the end of your kaleidoscope. Lamination Wheels are recommended for mounting on Clarity’s Axle Pack (#1004).
  • Lamination Wheels We are temporarily substituting the 60 mm wheels for the Lamination Wheels. Lamination Wheels are four 3” diameter glass circles with center holes and two sets of brass bushings. Between each set of glass wheels, you can laminate Clarity’s Kaleido-Flowers, or any other flat items like stamps, stickers, paper shapes, etc. You can make two rotating glass wheels to mount on the end of your kaleidoscope. Lamination Wheels are recommended for mounting on Clarity’s Axle Pack.
  • Lens-Plastic for Littlescope This is a 2-3/8 inch (60 mm) focal length lens used the Little Marblescope and Mini Oil-Wand Scope. It is 1/2" in diameter.